3. MAINTENANCE
Fig. 3.6.4
During assembly of the housings [11] make sure they
are in the correct position – the inlet pipe has a valve
ball stopper.
Fig. 3.6.5
When fastening the domed nuts, remember to do it
according to the tightening procedure and with the
appropriate torque.
NOTE! After a few weeks of operation retighten the
domed nuts with the appropriate torque.
Fig. 3.6.6
When fastening the tri-clamps apply some FDA grade
lubricate on the thread.
3.6.1.
Test run
We recommend you to conduct a test run of the pump before installing it in the system, so
no liquid gets wasted if the pump leaks or perhaps does not start accordingly to wrong
assembly of the pump.
After a few weeks of operation retighten the nuts with appropriate torque.