3.
MAINTENANCE
IOM manual Tapflo Hose pumps
26
Fig. 3.8.12
Apply lubricant on the inner surface of the hose
(where the rollers run).
Fig. 3.8.13
Assemble the front connection bracket [170F],
connect power to the motor and rotate the roller
180°.
Fig. 3.8.14 PTL30
–
PTL45
Remove the cover and install the missing roller
assembly without any shims.
Fig. 3.8.15
Set the roller pressure according to the Roller
Adjustment procedure described in chapter 3.9.
Fig. 3.8.16
Assemble the front connection bracket and the front
cover [12].
The hose is now re-assembled. Make sure to open the suction and discharge valves before pump
start-up. Check the direction of rotation of the motor.
170F
12
Summary of Contents for PTL P
Page 45: ......
