3.
MAINTENANCE
IOM manual Tapflo Hose pumps
28
Fig. 3.9.6
Clean the new hose [15] thoroughly before assembly.
Slightly lubricate the hose [15] and the inside of the
boot cover [270] with Tapflo lubricant.
Fig. 3.9.7
Insert the hose [15] by hand to the suction port of the
pump.
Fig. 3.9.8
While pushing in the hose jog run the motor.
The shoes [92] / rotor [90] will guide the hose through
the pump into the suction port.
Fig. 3.9.9
Guide the hose [15] to the discharge flange ring
[71/73].
Fig. 3.9.10
Insert the clamp bands [272] and [273] on the suction
side of the pump.
Disassemble the flange ring and brackets on the
discharge side.
Fig. 3.9.11a PT25-PT80
Assemble the brackets [170]. Assemble the insert [70]
with the flange ring [71/73] into the hose and tighten
the clamp bans [272] and [273].
NOTE!
Tapflo lubricant may be used to ease
assembly of the insert into the hose.
270
15
15
273
272
70
273
272
71 73
Summary of Contents for PT CIP
Page 46: ...5 DATA IOM manual Tapflo Hose pumps 45...
Page 56: ......
