3.
MAINTENANCE
IOM manual CTV vertical centrifugal pumps
19
Fig. 3.3.2.8
Insert the pump casing unit [11] on the motor shaft.
Fig. 3.3.2.9
Using the special assembly tool [8-32-9XXX-MT]
s
crew in the impeller [9…] onto the motor shaft.
Note!
Block the motor fan in order to perform this
procedure. Use a torque wrench to screw the impeller
with the appropriate torque (see table in section 6.2.).
Fig. 3.3.2.10
Proper utilization of the 8-32-9XXX-MT assembly
tool.
Fig. 3.3.2.11
Make sure that the lip seal is touching the ceramic
bushing.
Fig. 3.3.2.12
Screw the pump casing unit [11] to the motor using
motor mounting screws [121] and washers [122, 123].
Note!
Make sure the shaft rotates concentrically in the
casing unit.
Summary of Contents for CTV 25-10
Page 38: ......
