background image

2

SAFETY INSTRUCTIONS

1.

   Read Instructions — All the safety and operation instructions 

should be read before this product is operated.

2.

   Retain Instructions — The safety and operating instructions 

should be kept for future reference.

3.

   Heed Warnings — All warnings on this product and in these 

operating instructions should be followed.

4.

   Follow Instructions — All operating and other instructions 

should be followed.

5.

   Water and Moisture — This product should not be used near 

water – for example, near a bathtub, washbowl, kitchen sink, 

laundry tub, in a wet basement, near a swimming pool, etc.

6.

   Cleaning — Clean only with a dry cloth.

7.

   Ventilation — This product should be situated so that its location 

or position does not interfere with its proper ventilation. For 

example, the Component should not be situated on a bed, 

sofa, rug, or similar surface that may block any ventilation 

openings, or placed in a built-in installation such as a bookcase 

or cabinet that may impede the fl ow of air through ventilation 

openings.

8.

   Heat — This product should be situated away from heat 

sources such as radiators, or other devices which produce 

heat.

9.

   Power Sources — This product should be connected to a 

power supply only of the type described in these operation 

instructions or as marked on this product. 

10.

  Power Cord Protection — Power supply cords should be routed 

so that they are not likely to be walked upon or pinched 

by items placed upon or against them, paying particular 

attention to cords at plugs, convenience receptacles, and 

the point where they exit this product. 

11.

  Object and Liquid Entry — Care should be taken so that 

objects do not fall on, and liquids are not spilled into, this 

 product.

12.

  Damage Requiring Service — This product should be serviced 

only by qualifi ed service personnel when:

 

A.

 The power-supply cord or the plug has been damaged; or

 

B.

 Objects have fallen, or liquid has spilled into this product; or

 

C. 

This product has been exposed to rain; or

 

D.

 This product does not appear to operate normally or 

exhibits a marked change in performance; or

 

E.

  This product has been dropped, or its chassis damaged.

13.

  Servicing — The user should not attempt to service this 

product beyond those means described in this operating 

manual. All other servicing should be referred to the Tapco 

Service Department.

14.

  To prevent electric shock, do not use this polarized plug with 

an extension cord, receptacle or other outlet unless the 

blades can be fully inserted to prevent blade exposure.

Pour préevenir les chocs électriques ne pas utiliser cette fi che polariseé avec 

un prolongateur, un prise de courant ou une autre sortie de courant, sauf si les 

lames peuvent être insérées à fond sans laisser aucune pariie à découvert.

15.

  Grounding or Polarization — Precautions should be taken so 

that the grounding or polarization means of this product is not 

defeated.

16.

  Power Precaution — Unplug this product during lightning 

storms or when unused for long periods of time.

17.

  This apparatus does not exceed the Class A/Class B 

(whichever is applicable) limits for radio noise emissions 

from digital apparatus as set out in the radio interference 

regulations of the Canadian Department of Communications.

ATTENTION —Le présent appareil numérique n’émet pas de bruits radioélectriques 

dépassant las limites applicables aux appareils numériques de class A/de class B 

(selon le cas) prescrites dans le règlement sur le brouillage radioélectrique édicté 

par les ministere des communications du Canada.

WARNING — To reduce 

the risk of fi re or electric 

shock, do not expose 

this appliance to rain or 

moisture.

PORTABLE CART WARNING

Carts and stands - The
Component should be used
only with a cart or stand
that is recommended by
the manufacturer.
A Component and cart
combination should be
moved with care.  Quick
stops, excessive force, and
uneven surfaces may cause
the Component and cart
combination to overturn.

CAUTION    AVIS

RISK OF ELECTRIC 

SHOCK 

DO NOT OPEN

RISQUE DE CHOC ELECTRIQUE

NE PAS OUVRIR

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED PERSONNEL

ATTENTION: POUR EVITER LES RISQUES DE CHOC

ELECTRIQUE, NE PAS ENLEVER LE COUVERCLE. AUCUN

ENTRETIEN DE PIECES INTERIEURES PAR L'USAGER. CONFIER

L'ENTRETIEN AU PERSONNEL QUALIFIE.

AVIS: POUR EVITER LES RISQUES D'INCENDIE OU

D'ELECTROCUTION, N'EXPOSEZ PAS CET ARTICLE 

A LA PLUIE OU A L'HUMIDITE

   The lightning flash with arrowhead symbol within an equilateral 
triangle is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be 
of sufficient magnitude to constitute a risk of electric shock to persons.
   Le symbole éclair avec point de flèche à l'intérieur d'un triangle 
équilatéral est utilisé pour alerter l'utilisateur de la présence à 
l'intérieur du coffret de “voltage dangereux” non isolé d'ampleur 
suffisante pour constituer un risque d'éléctrocution.

   The exclamation point within an equilateral triangle is intended to 
alert the user of the presence of important operating and maintenance 
(servicing) instructions in the literature accompanying the appliance.
   Le point d'exclamation à l'intérieur d'un triangle équilatéral est 
employé pour alerter les utilisateurs de la présence d'instructions 
importantes pour le fonctionnement et l'entretien (service) dans le 
livret d'instruction accompagnant l'appareil.

Summary of Contents for Squeez





















Reviews: