background image

12

Repair

Service for TAPCO products is available at our 

factory, located in sunny Woodinville, Washington. 

Service for TAPCO products living outside the United 

States can be obtained through local dealers or 

distributors.

If your monitor needs service, follow these instructions:

1.  Review the preceding troubleshooting suggestions. 

Please.

2.  Call Tech Support at 1-800-258-6883, 7 AM to 5 PM 

PST, to explain the problem and request an RA 

(Return Authorization) number. Have your monitor’s 

serial number ready. You must have an RA number 

before you can obtain service at the factory.

3.  Keep this owner’s manual and the detachable 

linecord. We don’t need them to repair the monitor.

4.  Pack the monitor in its original package, including 

endcaps and box. This is very important. When 

you call for the RA number, please let Tech 

Support know if you need new packaging. 

LOUD 

Technologies is not responsible for any damage 
that occurs due to non-factory packaging.

Lonely? Looking for that special someone? Do you have a question about 
your TAPCO Monitor?

Please call our Technical Support chaps at 

1-800-258-6883

, Monday to Friday, from 7 AM to 5 PM PST.

After hours, visit www.tapcogear.com and look under 

Support

, or e-mail us at [email protected]

5.  Include a legible note stating your name, shipping 

address (no P.O. boxes), daytime phone number, 

RA number, and a detailed description of the 

problem, including how we can duplicate it.

6.  Write the RA number in 

BIG PRINT

 on top of the box. 

Units sent to us without the RA number will be refused.

7.  Ship the monitor to us. We suggest insurance for all 

forms of cartage. Ship to this address:

TAPCO

SERVICE DEPARTMENT

16220 Wood-Red Road NE

Woodinville, WA 98072

8.  We’ll try to fi x the monitor within three to fi ve 

business days. Ask Tech Support for the latest turn-

around times when you call for your RA number. 

The monitor must be packaged in its original 

packing box, and must have the RA number on 

the box. Once it’s repaired, we’ll ship it back the 

same way in which it was received. This paragraph 

does not necessarily apply to non-warranty repair.

Flash From The Past

“A gracious hello. This is Ernestine from the phone company. 
Have I reached the party to whom I am speaking?”
      – Ernestine (a.k.a. Lily) Tomlin on Rowan & Martin’s Laugh-In, circa 1969

Summary of Contents for S8

















Reviews: