2
STEP 4: APPLYING GREY/WHITE MEASURING TAPE
Insert 12"x12" piece of coil marked at 6" into the brake and lock it
lined up at the 6" mark (
Fig. 6
). Pull/slide the Material Stop toward
the front of the brake until it contacts the coil.
Tighten the thumb screw.
Use the pencil to mark a line on the face of the Pivot Bar in front
of the Material Stop (
Fig. 7
) and remove the Material Stop.
Fig. 6
Fig. 7
STEP 3: APPLYING 3” MEASUREMENT STICKER
Remove the Material Stop from the Pivot Bar.
Apply the measurement sticker with the -3" arrow towards the 3"
side (
Fig. 5
). With the stickers in place, attach the Material Stop
to the Bar Pivot Assembly with measurement arrows pointing
toward you and the -3" pointing away.
Repeat process for remaining Material Stop.
3" Side
Square
Side
Fig. 5
