background image

17

18

Wall Fan

Wall Fan

The troubleshooting guide addresses the most common 
problems. If problems persist, feel free to contact our 
Customer Support at 

[email protected]

WARRANTY AND SERVICE

Thanks for choosing TaoTronics wall fan. This product is covered with TaoTronics product and labor warranty for 12 
months from the date of its original purchase. 

The warranty will not apply in cases of:

• Accident, misuse, or repairs performed by unauthorized personnel.

• Any unit that has been tampered with or used for commercial purpose.

• Normal wear and tear of wearable parts.

• Use of force, damage caused by external influences.

• Damage caused by non-observance of the User Manual, e.g. connection to an unsuitable mains supply or non-

compliance with the instructions.

• Partially or completely dismantled appliances.

• Defects caused by or resulting from damages from shipping or from repairs, service, or alteration to the product or 

any of its parts that have been performed by a repair person not authorized by TaoTronics.

We can only provide after sales service for products that are sold by TaoTronics or TaoTronics authorized retailers and 
distributors. If you have purchased your unit from a different place, please contact your seller for return and warranty 
issues.

* Please have your invoice and order ID ready before contacting Customer Support.

Q

Excessive noise.

Fan does not operate.

Oscillation is not 

steady or fan vibrates.

Why the remote 

control is not working.

A

• It is normal that there is noise during operation. If too loud, please set the fan to lower speed. 

• Check if the blade is installed properly.

• Make sure the fan is connected to a powered electrical outlet.

• Make sure the fan is mounted firmly on a vertical wall.

• Clean the blade regularly.

• Make sure the fan is connected to a powered electrical outlet.

• Check that the remote control is powered and move the obstacles between the fan and the  

remote control.

• Operate the remote control near or in front of the wall fan.

NORMAL

SLEEP

BREEZE

HIGH

MED-

LOW

MED-

HIGH

LOW

MED

2

1

8

4

Summary of Contents for TT-TF011















Reviews: