EN
Assembly and Disassembly
Note:
• When connecting the sections, rotate in opposite directions with both hands and do not screw with too
much force.
• You can choose to use different numbers of sections for different purposes and scenes.
To disassemble, follow the assembly steps as above in the reverse order.
How to Use
1. Brig
2. Brightness –
3. Color Temperature Button
4. Power / Timer Button
5. Power Indicator
01/02
Standby Mode
Connect the lamp to a power source and it will enter standby mode. The Power Indicator on the Power
Button will light up.
Power On / Off
• Tap the Power Button to turn the lamp on / off.
Color Temperature / Brightness Adjustment
Tap the Color Temperature Button to cycle through 3 color temperature settings. Tap the Brig / -
Button to adjust 5 levels of brightness in each color temperature setting.
Auto Shutoff Timer
Press and hold the Power / Timer Button for 2 seconds, the Power Indicator will start to flicker and activate a
60 minutes auto shut-off timer. Repeat this operation or press the Power / Timer Button to turn off the timer.
Adjust the Lamp Head
Note: Please do not turn the lamp head for over 180° to avoid damaging the gooseneck.
1
2
3
4
M
5
+
#1
#2
#1
