5
F8
Status/Diagnostics
Firmware Version and Release Date
Laser/CCD Scanner Testing
Keyboard Information
Show Scan Codes
F9
Cloning
Lockout Cloned Reader Setup Mode
Press ENTER To Begin Cloning
F10
Reset All Defaults
Reset All Defaults?
Editing Keys
For those categories which have more than one option , the UP and DOWN arrow and ENTER keys are used
to move form one option to the next . In addition to the UP and DOWN arrow Keys, the CTRL UP and
CTRL DOWN arrow keys are used to move to the bottom and the top of the list . The following is a list special
editing keys and a description of their function:
key
Description
Left Arrow , Right Arrow
Toggles through the settings for the current option.
UP & Down Arrow
Moves from one option to the previous or next within the category or
group
CTRL+UP& CTRL+Down Arrow
Move to the top or bottom of the category or group
Home & End
Moves to the beginning or end of an input field
ALT Backspace
Toggles the output mode during configuration , between destructive
backspace and non-destructive backspace. Defaults to non-destructive
backspace
CTRL+KEYPAD
Increases transmit speed during setup
CTRL-KEYPAD
Decreases transmit speed during setup
CTRL F7
Test the current Beep Tone and Beep Duration
CTRL F10
Resets the current option to the default setting
SHIFT F10
If you are in a category with groups (F2-F5),SHIFT F10 resets current
group . If you are in a category without groups (F1,F7-F10),SHIFT
F10 resets the entire category
ALT F10
Resets all options in current category to default settings.
CTRL+ Escape
Exit configuration saving changes (Permanent)
SHIFT+ Escape
Exit configuration saving changes(Temporary)
ATL +Escape
Exit configuration without saving changes.
Note:
If you experience some character loss during setup , you may press the CTRL-(Keypad Minus)key to
solw character transmission , To speed up character transmission press the CTRL-(Keypad plus)key.
Note:
After 5 minutes of inactivity (no key presses ) the decoder will exit setup mode and save all changes
The following sections document all of the setup mode categories and the groups and individual options within
each category . Next to the option name is the default setting for the option . In addition to the default setting
the keys that are used for editing are listed to the right of the option name . The meaning of each of the key
cois as follows :
Key Lcon
Meaning
←
→
The left and right arrow keys scroll through available settings for the
option.
ALT
An ALT keypad sequence may be used to enter characters for entry into
