Button Control
Function
Power On/Off
Redial
Voice Control
Answer Calls
Reject Calls
End Calls
Mute Calls
Transfer Calls
Operation
Press and hold the Multifunction
Button for 2 seconds
Press the Multifunction Button twice
Press and hold the Multifunction
Button for 1 second
When there is an incoming call,
press the Multifunction Button once
When there is an incoming call,
press and hold the Multifunction
Button for 1 second
During a call, press the Multifunction
Button once
During a call, press the Microphone
Button once. Press again to normal
calls
During a call, press and hold the
Multifunction Button for 1 second
to transfer the call between the
phone and the headset
When there is a second incoming
call (B) in the course of an ongoing
call (A),
•
Press the Multifunction Button
once to answer B and hang up A
·
Press the Multifunction Button
twice to answer B and on-hold A
·
Press and hold the Multifunction
Button for 2 seconds to reject B
During a second call, press the
Multifunction Button twice to
transfer calls between A and B
Press the / - Button
Press and hold the Volume - /
+ Button for 1 second
Press the Multifunction Button
Second Call
/ -
Previous / Next Track
Pause / Play
The Bluetooth
®
word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
Sunvalleytek International Inc. is under license. Other trademarks
and trade names are those of their respective owners.
NOTE:
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic
Equipment) (Applicable in countries with separate collection
systems) This marking on the product, accessories or literature
indicates that the product and its electronic accessories should
not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment
or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly
to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this
product, or their local government office, for details of where and
how they can take these items for environmentally safe recycling.
Business users should contact their supplier and check the terms
and conditions of the purchase contract. This product and its
electronic accessories should not be mixed with other commercial
wastes for disposal.
2) If you want to pair the headset with another device when
already paired, deactivate the Bluetooth® function on the
paired device or remove "TaoTronics TT-BH041" from the
Bluetooth list.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment. This device complies with Part 15 of the
FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
A Noise-free Telephone Call Starts from THIS…
Taotronics BH041 powered by Elevoc Vocplus® AI noise
reduction technology can help you remove unwanted
background noises from your high-value business calls. By
leveraging powerful Computational Auditory Scene Analysis
(CASA) and Deep Neutral Network (DNN), Elevoc Vocplus®
could simulate the human auditory system and precisely
extract your voice from background noise, delivering the
first-ever clear voice quality and optimized speech intelligibility.
CUSTOMER SERVICE
Delivering world-class support via clear, comfortable and
intelligible speech means everything in your business.
Taotronics BH041 powered by Elevoc Vocplus® eliminates
different types of background noise and enables the other
ones to hear you clearly and understand you at ease.
CALL CENTER
Customers don’t want to hear disturbing sounds such as
phone ringing, keyboard tapping, machinery, babble noise, air
conditioner, etc.. Taotronics BH041 powered by Elevoc
Vocplus® help you solve the noise interference problem and
make your customers hear nothing but your clear voice.
