Note:
1. When turned off, although the unit stopped working, the fan will continue
working for 3 minutes to avoid generation of mildew in the mist tube.
2. When turned off, the LED display will dim to half of the brightness if there is
no operation in 3 seconds.
03/04
Power On / Off
Tap the Power Button to start (default: medium level) / stop misting with a beep
sound with each tap.
Adjust the Mist
Tap the Mist Button to adjust the mist output between high / medium / low levels, the
mist level indicator on the LED display will light up accordingly.
Set the Humidity Level
1. Tap the Humidity Button to set the humidity level from 30% to 95% with an increase
of 5% with each tap.
2. Once set, the humidity level on the LED display will flash 3 times to confirm your
setting.
3. When the humidity level is at 95%, tap the Humidity Button one more time to cancel
the humidity setting, the LED display will show “-- --%“.
4. Or you can turn off the humidity setting at any time by tapping and holding the
Humidity Button for 2 seconds.
Adjust the Warm Mist Level
Tap the Warm Mist Button to adjust the heat level between high / medium / low
levels. When the heat level is at high level, tap the Warm Mist Button one more time to
turn off the heating. The corresponding warm mist level indicator on the LED Display
will light up.
Set the Timer
1. Tap the Timer Button to set the timer from 1 hour to 12 hours with an increase of 1
hour with each tap. Once set, the timer indicator on the LED display will flash 3
times to confirm the setting.
2. When the timer is at 12 hours, tap the Timer Button again to turn off the timer. Or you
can turn off the timer at any time by tapping and holding the Timer Button for 2
seconds.
Sleep Mode
1. Tap the Sleep Button to enter sleep mode. The LED display will show “ZZZ”.
2. The beep sound is disabled in sleep mode and the LED display will turn off if there is
no operation in 3 seconds. Tap any button (except the Power Button) to wake it up.
3. The unit will enter low mist level automatically, while the mist, humidity, and timer
settings remain functional. The warm mist mode is disabled.
4. Tap the Sleep Button again to turn off the sleep mode with “ZZZ” showing on the LED
display.
Memory Function
If power is not disconnected, the unit will remember the mist level setting of the last
time when it was turned off.
Low Water Protection
The unit will turn off automatically when water has been depleted. The low water
indicator “Err” on the LED display will light up.
