Resetting Your Earbuds
1. Remove "TaoTronics A10" from the Bluetooth device list.
2. Place the earbuds back into the charging case and keep the cover open.
3. Press and hold the Reset Button for 10 seconds until the LED indicator on the
charging case flashes white three times.
Reset the earbuds if failed to connect with your device properly.
10s
To pair with another Bluetooth device, deactivate the Bluetooth function
on the paired device or remove “
TaoTronics A10
” from its Bluetooth list.
• Wipe only with a dry, soft cotton swab or equivalent.
Never insert anything into the nozzle.
• Clean the earbuds and the charging case regularly.
• Keep away from sharp objects to avoid scratches.
• Place in a dry and shady place if it is to be idle for a long time.
• DO NOT clean with detergent or chemicals.
CLEANING AND MAINTENANCE
TROUBLESHOOTING GUIDE
Securely wear the earbuds (see “Wearing”).
Earbuds fall off easily :
Wearing
• Make sure the Bluetooth function is activated
before pairing.
• Place the device to be connected close to the earbuds.
Move both devices away from other Bluetooth devices.
• Remove the earbuds from the Bluetooth list when
already paired before.
• Reset the earbuds and pair again
(see “Resetting Your Earbuds”).
Cannot connect with your device :
Bluetooth
Connection
• Make sure there are no obstacles between the
two devices.
• Fully charge the earbuds.
• Reset the earbuds and pair again
(see “Resetting Your Earbuds”).
Intermittent connection for one of the earbuds :
• Make sure the earbuds are within the effective range
(e.g., 30 ft. / 9 m) of your device. The range may vary
with the environmental circumstances.
• Turn off other Bluetooth devices to decrease
the interference.
• Remove the earbuds from the Bluetooth list and
connect again.
Bluetooth disconnected frequently :
06
SoundLiberty A10
07
SoundLiberty A10
