Single Earbud Mode
Pair both earbuds with your device in Couple Earbuds Mode before using in
Single Earbud Mode.
Use Primary (Left) Earbud Only
1. Take out the primary (left) earbud from the charging case, and make sure the
secondary (right) earbud is placed in the charging case and the lid is covered.
2. It will try to pair with the last connected device for the first 20 seconds. If
re-pairing failed in 20 seconds, the earbud will enter pairing mode with voice
prompt “Pairing” every 10 seconds.
3. Turn on the Bluetooth function on your device and search for the nearby
devices. Find "TAOTRONICS SoundLiberty 95 L" in the searching results, tap on
the name to connect.
Use Secondary (Right) Earbud Only
1. Take out the secondary (right) earbud from the charging case, and make sure
the primary (left) earbud is placed in the charging case and the lid is covered.
2. The secondary earbud will enter pairing mode with voice prompt “Pairing” every
10 seconds.
3. Turn on the Bluetooth function on your device and search for the nearby
devices. Find "TAOTRONICS SoundLiberty 95 R" in the searching results, tap on
the name to connect.
Manually Pairing
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the
Reset Button
for 3 seconds to disconnect the currently
paired device.
3. The earbuds will enter pairing mode with the LED indicator on the charging
case flashing blue and white alternately.
4. Pair with your new Bluetooth® device as instructed in “Pairing” section.
If you failed to pair your device with the earbuds, please clear the pairing history
as instructed below:
1. Place both earbuds back in the charging case with the lid uncovered.
2. Press and hold the
Reset Button
for 8 seconds until the LED indicator on the
charging case flash blue and white alternately.
3. If you have paired your device with the earbuds before, remove
"TAOTRONICS SoundLiberty 95 L" from the Bluetooth device list and pair again.
4. Re-pair with your Bluetooth® device as instructed in “
Pairing
” section.
Clear Pairing List
Note:
If you want to pair the earbuds with another device when you have
already paired them with a device, deactivate the Bluetooth function
on the paired device or clear "TAOTRONICS SoundLiberty 95 L" from
its Bluetooth list. Restore the earbuds to factory settings as
instructed above if pairing failed.
Operation and Functions
Function
Play / Pause
Next Track
Previous Track
Answer Phone
Call
Hang Up
Phone Call
Decline an
Incoming Call
Operation
Only available in Couple Earbuds Mode:
Tap the Touch Control on the right
earbud twice under music
Tap the Touch Control on the
right earbud three times
Tap the Touch Control on the
left earbud three times
• Answer via earbuds:
Tap the Touch Control on either of
the earbuds twice
• Answer via mobile phone:
Tap Answer on the mobile phone
Tap the Touch Control on either of the
earbuds twice
Tap the Touch Control on either of the
earbuds three times
Voice Prompt
/
/
/
/
/
Call rejected
Function
Turn On / Off
Voice Control
Clear Pairing List
Go into Pairing
Mode
Successfully
paired with your
device
Bluetooth out of
Range / Failed to
pair with your
device
Operation
•
Couple Earbuds Mode:
Tap the Touch Control on the left
earbud twice until a beep is heard
•
Single Earbud Mode:
Tap the touch control on either of the
earbuds twice until a beep is heard
Refer to the “
Clear Pairing List
”
section
Refer to the “
Pairing
” section
/
/
Voice Prompt
Toot
/
Pairing
Connected
Disconnected
Note:
Only when you are wearing the earbuds can you hear the voice prompt.
Cleaning and Maintenance
1. Clean the earbuds and the charging case on a regular basis.
2. Use dry and soft cotton cloth to wipe the unit.
3. Keep away from sharp objects to avoid scratches.
4. Put the unit in a dry and shady place if it is to be idle for a long time.
5. Do not clean the product with detergent or chemicals.
Note:
Do not insert anything into the product.
Troubleshooting
No.
Problem
Solution
Failed to turn on the
earbuds
Earbuds low battery, please charge them
1
Failed to charge the
earbuds
• Place the earbuds into the charging
case properly
• Make sure the charging case is
fully charged
2
Can’t charge the
charging case
Make sure the charging cable is intact
and plugged in properly
3
Can’t find
“TAOTRONICS
SoundLiberty 95 L”
in the Bluetooth
device list
The earbuds reconnected with previously
paired device automatically:
• Deactivate the Bluetooth function of
previously paired device or clear
“TAOTRONICS SoundLiberty 95 L” from its
Bluetooth device list, and then search again
• Put the device to be connected close to
the earbuds
4
Failed to pair the
earbuds with your
device
• Turn on the device and activate its
Bluetooth function before pairing
• Bring the earbuds into pairing mode
as instructed in the “Pairing” section
5
6
No sound in one of the
earbuds in couple
earbuds mode
Place both earbuds back to the charging
case then take them out, they will pair
with each other automatically. If pairing
failed, restore them back to the factory
settings as instructed in the “Clear Pairing
List” section
7
Poor sound quality
• Wear the earbuds properly and keep
them close to each other.
• Place the connected device close to the
earbuds or remove the obstacles
between them
• Clear the debris on the earbuds
8
Unstable connection
• Keep the earbuds close to your Bluetooth
device
• The effective distance may shorten with
obstacles in the way
• Turn off other Bluetooth devices to
decrease the interference
9
Can’t hear the other
party during a phone call
Set the volume to higher level
10
The other party can’t
hear your voice during
a phone call
Free the built-in microphone of any
covers
11
Multifunction Touch
control of the earbuds
is unresponsive
Place the two earbuds into the charging
case and cover the lid, disconnect the
Bluetooth connection. Uncover the lid to
turn on the earbuds and pair again.
Warranty and Service
If any problems occur, please contact the TaoTronics Customer Care Centre via
the contact information listed in this User Guide.
The Bluetooth® word mark and logos are registered trademarks owned by the
Bluetooth SIG, Inc. and any use of such marks by Sunvalleytek International Inc. is
under license. Other trademarks and trade names are those of their respective owners.
NOTE:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product
and its electronic accessories should not be disposed of with other household
waste at the end of their working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate
these items from other types of waste and recycle them responsibly to promote
the sustainable reuse of material resources. Household users should contact
either the retailer where they purchased this product, or their local government
office, for details of where and how they can take these items for environmen-
tally safe recycling. Business users should contact their supplier and check the
terms and conditions of the purchase contract. This product and its electronic
accessories should not be mixed with other commercial wastes for disposal.
www.taotronics.com
E-mail:
MANUFACTURER
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual
TT-BH095_V1.0_EN
MADE IN CHINA
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Note:
If you want to change to couple mode, simply take out the other
earbud from the charging case, they will pair with each other
automatically.
Note:
The pairing history will not be cleared under this operation.