for 2s
there is a call incoming
5sec
Voice
transfer
Long press
power button
for 2s
Long press power button for 2s can transfer
the voice between the headphone and phone
after answering the call
Blue LED light
on
Call hold
Press power
button
Long press power button can keep the current
call while answering a call
Blue LED light
on
Remove
call hold
Short press
power button
Short press the power button can return to
first call while in call hold status
Blue LED Flesh
twice
every
5sec
End call
Short press
power button
Short Press the power button can end a call
while the call in progress
Blue LED Flesh
twice
every
5sec
Multipoint
A2DP
Connection
headphone
can
connect
to
two
phones(
（
iPhone6s
、
SamsungS6)
Redial last
number
Double click
power button
Double click power button can do redial last
number
RED LED flash
fast
in
an
alternating
pattern
(200mS)
Charging
When in charging, the red LED will be always on; once the energy is full,it will go
off
Line in
When the Audio cable is plug in, the headphone will play music in line-in
mode(the headphone will power off automatically)
low battery
When power is low, then there will be a voice prompt
“dududu”, while the RED
LED flashes twice per 5second at music-playing mode (flashes once per 5s at
other mode)
—this alarm will occur in every 3minutes, and it will lasts about 3-5
times until the headphone power off automatically.
Pairing the headphones with a computer
1.Before pairing the headphone with your computer, please
make sure your computer or laptop can
support bluetooth function. If not, you must
purchase a bluetooth adapter
(preferably version 2.1 or above).
2. Insert the bluetooth adapter to the computer, and make sure the bluetooth function of the computer is
already activated.
3. Press the power button about 5s when the headphone is at power off status. It will go into paring mode
when the blue and red LED light flash alternately, while you can also hear a prompt
4. Open the bluetooth software and choose to search the bluetooth device, and after few seconds, the
names of bluetooth device will list out.
6. Click the pairing name
“Taotronics TT-BH040”to pair, when there is a prompt “beep”, this means your
headphone is paired successfully .