IG-20-08-008-A
www.taoglas.com
Suction
Cup Mount Installation
Using the mounting plate as guide on the mounting
surface, align to the desired location of the antenna.
Press firmly on each cup to secure in place
Note: Check that the surface to mount on is flat,
non-porous, and has been adequately cleaned to ensure
proper adhesion.
Insert the metal mounting clamps(both top and bottom)
through the inner slots of the mounting plate
The TGX.45 antenna can be installed with 3 different methods: pole mount, wall mount, and suction
cup mount. Please refer to the appropriate section below that best fits your installation needs
Hardware Installation
Insert the ball joint firmly into the socket on the back of
the antenna body and slide the tightening nut into the
antenna housing’s back plate to secure in place. Adjust
to the desired antenna orientation on the bal joint and
tighten the nut to fix the antenna in place.
Insert the tightening nut onto the ball joint mount with
the flat surface facing away from the mounting plate
Completed Installation
