EL.1A EDGE Locate User Guide Rev 02/20
9
Using Hexagon Smart Net with u-center
1.
To use the Hexagon correction service, perform the steps outlined above to connect to the EDGE Locate module. In addition
to this please perform the following steps:
a.
Select receiver >
‘NTRIP Client’
b.
This will present you with a client settings screen.
Please fill in the details provided in the
registration email
from
Hexagon
.
c.
When you have the details entered, click
‘Update source table’
. This will display a selection of mount points in the
‘NTRIP mount point:’
drop-down. From here you can select the correct mount point sent in the email
from Hexagon.
d.
Click
‘OK’
to open a connection with the error correction service. This will cause NTRIP Client symbol at the bottom
of the application to start
flashing green
as corrections are received.
