9. CSB.01 Specifications
• Frequency Range: Cellular 850 (824MHz – 894MHz), PCS 1900 (1850MHz – 1990MHz)
• 20dB BW: 850 UL: 39MHz, 1900 UL: 115MHz
• Rated Uplink Maximum Output Power: Cellular 850; 27dBm, PCS 1900; 27dBm
• Rated Downlink Maximum Output Power: Cellular 850; -20dBm, PCS 1900; -20dBm
• Current Draw @ 12VDC: Idle: 250 milliamperes; Max: 1 amperes
• Power Requirement: 8.0 to 36.0 volts DC (negative ground), Connector is center positive
• Nominal Gain: Cellular 850: 15dB, PCS 1900: 15dB
• Input/output Impedance: 50 Ohms
• Rated Mean Output Power: 27dBm
FCC ID: XS7-WRE2710
IC ID: 8918A-WRE2710
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This is a CONSUMER device.
BEFORE USE, you MUST REGISTER THIS DEVICE with your wireless provider
and have your provider’s consent. Most wireless providers consent to the use
of signal boosters. Some providers may not consent to the use of this device
on their network. If you are unsure, contact your provider.
You MUST operate this device with approved antennas and cables as specified
from the manufacturer. Antennas MUST be installed at lease 20cm / 8 inches
from any person.
You MUST cease operating this device immediately if requested by the FCC or
a licenced wireless service provider.
WARNING - E911 location information may not be provided or may be
inaccurate for calls used by this service.
