1. Place the ATV on a level surface.
2. Place an oil pan under the engine to collect the used oil.
3. Remove the engine oil filler cap, and then remove the engine oil drain bolt to drain the oil from
the crankcase.
4. Reinstall O-ring and drain plug to the specified torque.(14 Nm / 10 ft/lbs).
5. Refill engine with specified amount of the recommended engine oil.
Recommended engine oil is SAE 15W40 and oil capacity is 0.8 US qt. or 0.8 liters.
6. Start the engine, and then it let it idle for a few minutes .
7. Turn off engine and check engine dip stick for correct engine oil level .
NOTICE: When removing the engine oil drain bolt
the
0-ring
may
fall out. Take care not to lose
these parts.
NOTICE: Before installing the engine oil drain bolt, be sure to install the 0-ring, and then engine
drain bolt.
To change the engine oil
1.
Engine Oil Drain
Plug (17mm)
1. O-Ring
2. Drain Plug
50
Summary of Contents for G125
