Tantalus ST-1480 Operating And Installation Manual Download Page 26 | Manualshive

Page: 26 / 43

Tantalus ST-1480 Operating And Installation Manual Download Page 26

Page 26

User Conserve Mode

You can initiate the User Conserve Mode in your thermostat by pressing the Conserve Button. This
action will turn ON the Conserve Status light Green.

The purpose of the User Conserve Mode is to save energy by incrementing, in the case of Cooling,
or decrementing, in the case of Heating, the scheduled target temperature by a specified fixed
value.

If a temporary HOLD or the current scheduled SETPOINT expires, the incremental temperature
change is applied to the next scheduled SETPOINT.

Note

that you will not be able to change any scheduled or HOLD SETPOINTs while you are in the

User Conserve Mode, you will have to exit this mode before you can make those changes.

At this point, the thermostat will set back the current SETPOINT
(HOLD or scheduled SETPOINT) by a fixed value of 1°C to
conserve energy. The SETPOINT’s name at the Home Screen of
the thermostat will be replaced by a label showing “Conserve”.

«
...
24
25
26
27
28
...
»

Summary of Contents for ST-1480












































Reviews:

No comments