manualshive.com logo in svg

Tantalus RT-2200, Instruction Manual, Page: 2 / 7

Share
Download
Tantalus RT-2200 Instruction Manual Download Page 2

 

 

Notice 

The information contained in this document is subject to change without notice. 
 

Tantalus makes no warranty of any kind with regard to this material, including, but not limited to the implied 
warranties of merchantability and fitness for a particular purpose. Tantalus shall not be liable for errors 

contained herein or incidental consequential damages in connection with the furnishing, performance, or use 
of this material.  

 
 

FCC COMPLIANCE STATEMENT 

 

Changes or modifications not expressly approved by Tantalus Systems Corp. may void your authority to 
operate the equipment described in this manual.  

 
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to 

part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful 
interference in a residential installation. This equipment generates, uses and can radiate radio frequency 

energy and, if not installed and used in accordance with the instructions, may cause harmful interference to 
radio communications. However, there is not guarantee that interference will not occur in a particular 

installation. If this equipment does cause harmful interference to radio or television reception, which can be 
determined by turning the equipment off and on, you are encouraged to try and correct the interference by 

one of more of the following measures: 

• 

Reorient or relocate the receiving antenna. 

• 

Increase the separation between the equipment and receiver. 

• 

Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 

• 

Consult the dealer or an experienced radio/TV technician for help. 

 

 

 

 

 

 

Tantalus Systems Corp. 

4224 Manor St. 

Burnaby, BC 

Canada  V5G 1B2 

Tel: 604-299-0458 

Fax: 604-451-4111 

Email: 

[email protected]

 

Summary of Contents for RT-2200








Reviews:

No comments