Tannoy VS15 HL, User Manual, Page: 7 / 10

9.3 SECUR ET – VEB Eyebolt
7.
The Tannoy VS15HL loudspeaker can be flown
with high quality VEB M10 eyebolts with collar to
BS4278:1984. The loudspeaker is equipped with
internal steel braces, which also double as the
flying points, and accept VEB M10 eyebolts.
To install the VEB M10 eyebolts remove the
original M10 counter sunk screws from the
locations you wish to install the VEB M10 eyebolts.
Then replace these counter sunk M10 screws with
the VEB M10 eyebolts. The pullback points on the
rear of the cabinet should only be used for tilting
the loudspeaker to the desired angle.
Important: It is imperative for safety reasons that
two eyebolts linked to two independently fixed
straps are used per cabinet. VEB eyebolts should
be installed into the relative sides of the cabinet,
and should NEVER be installed on the top of the
cabinet. Never suspend one enclosure from
another to form an array or cluster using these
fittings.
Never attempt to use formed eyebolts i.e. formed
from a steel rod and bent into an eye.
!
FIG 1.