Tannoy VLS SERIES Operation Manual Download Page 14

11. Service parts and accessories 

14    

VLS Series Operation Manual  rev 1.0.0

11. Service parts and accessories 

12. Warranty  

No maintenance of the VLS Series loudspeakers is necessary. 

All Tannoy VLS Series professional loudspeaker products are covered by a 5 year warranty from the date of 
manufacture, subject to the absence of misuse, overload or accidental damage. Claims will not be considered 
if the serial number has been altered or removed. Work under warranty should only be carried out by a Tannoy 
Professional dealer or service agent. This warranty in no way affects your statutory rights. For further information 
please contact your dealer or distributor in your country. If you cannot locate your distributor please contact 
Customer Services, Tannoy Ltd at the address given below or check at www.tannoy.com. 

Customer Services, Tannoy Ltd., Rosehall Industrial Estate, Coatbridge, Strathclyde, ML5 4TF, Scotland 
Telephone: 44 1236 420199 
Fax: +44 1236 428230 
E-Mail: [email protected]

Please do not ship any product to Tannoy without previous authorisation. 

Part number

Description

7900 1333

Driver kit - 0805 3.5” LF

7900 1334

Tweeter - 0305 1” HF

Summary of Contents for VLS SERIES

















Reviews: