TECHNICAL SPECIFICATIONS
System
Frequency response (
±
3 dB)
44 Hz - 20 kHz
Maximum SPL (peak @ 1 m)
110 dB SPL
Maximum SPL at mix position
(one pair driven)
120 dB SPL
Distortion
< 0.5%
Dispersion (@ -6dB)
90
°
conical
Electronic section
Input
10 k
Ω
balanced on combined XLR/jack
connector
Sensitivity
Adjustable, +4 dBu or -10 dBu
Crossover frequency
1600 Hz
Amplifier output power
LF channel (6 Ohms load)
90 W rms
HF channel (6 Ohms load)
90 W rms
Output noise
(HF channel, 20Hz - 20 kHz unweighted)
-80 dBV
User controls and indicators
Input level, LF contour, HF contour (switches)
Power ON/OFF switch, Power ON LED, mains voltage selector.
Supply
Self-contained PSU with detachable mains power cord
Mains voltage adjustable to 220-240V or 110-120V
Fuse T1.25A/250V (220-240V range) or T2.5A/250V (110-120V range)
Power consumption 10 to 280 VA
Cabinet
Drive unit
8 “Tannoy Dual Concentric type 2046
Low frequency design
Bass-reflex load using flared port tubes, in 21 litres
Cabinet construction
MDF (36 mm) front and back panels,
19 mm high density particle board.
Two panels fitted with magnetic shielding plates.
Cabinet finish
Tannoy Dark Blue – Front Baffle
Hide grey - Sides
Cabinet dimensions (HxWxD)
275 mm x 450 mm x 290 mm
Cabinet weight
13 kg
Shipping dimensions (HxWxD)
390 mm x 545 mm x 360 mm
Shipping weight
17 kg
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Summary of Contents for System 800A
Page 1: ...System 800a USER MANUAL...
