TECHNICAL SPECIFICATIONS
LOUDSPEAKER
Frequency response (
1)
35Hz – 25kHz
Recommended amplifier power
150 to 500 w rms into 8
Ω
Power handling
Average: (2) 250 wrms Programme: 500 wrms
Nominal Impedance
4 or 8
Ω
Sensitivity (3)
104 dB SPL /2.83V @ 1 m
Distor tion
< 0.5%
Crossover frequency
250Hz & 1.5 kHz
CABINET
Drive units
15" full range, Point Source, Dual Concentric™
15" bass unit
Low frequency design
Optimised bass-reflex loaded, in 300 litres
Cabinet construction
MDF (36mm - front and back; 20.6mm - top, bottom and
sides) with energy absorbing bracing matrix and TF-2
acoustic wadding.
Cabinet finish
Velti shadow grey soft-texture finish. High pressure twin
laminate in shadow grey with metallic speckled finish on
top, bottom and sides.
Cabinet dimensions (HxWxD)
786 mm x 906 mm x 555 mm
(30.9” x 35.7” x 21.8mm)
Cabinet weight
85kg (187 lbs)
Shipping dimensions (HxWxD)
1020mm x 860mm x 660mm
(40.2” x 33.9” x 26”)
Shipping weight
96kg (221.2 lbs)
Tannoy Ltd.,
Professional Division, Coatbridge, ML5 4TF, Scotland
Tel: +44 (0)1236 420199 Fax: +44(0)1236 428230
e-mail: [email protected] Internet site: http://www.tannoy.com
TGI North America
, 300 Gage Avenue, Unit One, Kitchener, Ontario, N2M 2C8, Canada
Tel: (519) 745 1158 Fax: (519) 745 2364
Tannoy Nederland b.v.
, Anthonetta Kuijlstraat 19, 3066 GS Rotterdam
Tel: (010) 2860554 Fax: (010) 2860431
SYSTEM 215 DMT II
The availability of new materials
and manufacturing processes
has allowed Tannoy to design
the System 215 DMT II from first
principles, producing an all new
Dual Concentric™ monitoring
system with all the classic
benefits of single point source
monitoring combined with an
exceptionally detailed but
fatigue-free sound.
APPLICATIONS
Main reference monitoring in
professional facilities, including:
❚
Recording studios
❚
Mobile recording
❚
Broadcast
❚
Post production
❚
Audio visual
❚
Film studios
NOTES:
(1) ±3dB, measured at 1m in anechoic chamber
(2) Long term power handling capacity as defined in EIA
standard RS426A
(3) Averaged over specified bandwidth for half-space
environment. For anechoic conditions the figure is to be
decreased by 3dB
Tannoy operates a policy of continuous research and
development. The introduction of new materials or
manufacturing methods will always equal or exceed the
published specifications, which Tannoy reser ves the right to
alter without prior notice. Please verify the latest
specifications when dealing with critical applications
Par t No. 6483 0208 Issue 3
DUAL CONCENTRIC
P o i n t S o u r c e
A Member of the TGI plc Group of Companies
906.0
786.0
555.0
DUAL CONCENTRIC
P o i n t S o u r c e
