background image

Centre & Satellites

PERFORMANCE

Recommended amplifier power

Maximum Sensitivity (2.83Volts @ 1m)

Nominal impedance

Frequency response (-6dB)

Drivers

Crossover frequency

Magnetic shielding

Satellite Weight

Satellite Dimensions H x W x D

Centre Weight

Centre Dimensions H x W x D

Finish

Supplied accessories

Optional accessories

15 - 100 Watts

85dB

6 Ohms

140Hz - 78kHz

HF: 15mm (0.59”) titanium dome, neodymium magnet system

LF: 75mm (2.95”) paper cone

4.5kHz (mid to high) 140Hz (to subwoofer)

Yes

750gms (1.65lbs)

140 x 97 x 95mm (5.51 x 3.82 x 3.74”)

1.5kg (3.3lbs)

120 x 230 x 95mm (4.72 x 9.06 x 3.74”)

Black 
White

Wall mounting brackets 
25 metres (82ft 6”) speaker cable

Satellite floor stands available in black

Subwoofer

PERFORMANCE

Power output

Frequency response (-6dB)

Driver

Inputs

Power requirements

Fuse ratings

Additional features

Weight

Dimensions H x W x D

Finish

100 Watts

45Hz - 140Hz

200mm (8.00”) paper cone

Twin line or speaker level

160VA max

AC100-120V / 60Hz - Fuse: T1.6A L /250V

AC 220-240V / 50Hz - Fuse: T800mA L /250V

ON / OFF/ AUTO power function

9.0kg (20.0lbs)

345 x 250 x 370 mm (13.58 x 9.84 x 14.57”)

Black
White

Tannoy adopts a policy of continuous improvement and product specification is subject to change.

Tannoy United Kingdom

T: 00 44 (0) 1236 420199 E: [email protected]

TC Group International

T: 00 45 8742 7000

E: [email protected]

TC Group Americas 

T: 00 1 (519) 745 1158

E: [email protected]

Tannoy Middle East

T: 00 971 (04) 4401208 

E: [email protected] 

6481 0521 / 0311

How it all adds up

tannoy.com

SFX 5.1 Manual AW.qxd:Layout 1  17/3/11  13:00  Page 8

Summary of Contents for SFX 5.1









Reviews: