16
Revolution XT
Quick Start Guide
17
Other important information
1. Register
online.
Please register your new
MUSIC Group equipment right after you purchase it by
visiting tannoy.com. Registering your purchase using our
simple online form helps us to process your repair claims
more quickly and effi ciently. Also, read the terms and
conditions of our warranty, if applicable.
2. Malfunction.
Should your MUSIC Group
Authorized Reseller not be located in your vicinity,
you may contact the MUSIC Group Authorized Fulfi ller for
your country listed under “Support” at tannoy.com. Should
your country not be listed, please check if your problem
can be dealt with by our “Online Support” which may also
be found under “Support” at tannoy.com. Alternatively,
please submit an online warranty claim at behringer.com
BEFORE returning the product.
3. Power
Connections.
Before plugging the
unit into a power socket, please make sure you are using
the correct mains voltage for your particular model.
Faulty fuses must be replaced with fuses of the same type
and rating without exception.
Important information
REVOLUTION XT 6
REVOLUTION XT 6F
REVOLUTION XT 8F
REVOLUTION XT Mini
REVOLUTION XT C
Performance
Recommended amplifier power
(watt RMS)
25 - 120
25 - 150
25 - 200
25 - 100
25 - 120
Continuous power handling
(watt RMS)
60
75
100
50
60
Peak power handling (watt)
240
300
400
200
240
Sensitivity (2.83 volt @ 1 m)
89 dB
90 dB
91 dB
88 dB
89 dB
Nominal impedance (ohm)
8
8
8
8
8
Frequency response (-6 dB)
46 Hz - 32 kHz
38 Hz - 32 kHz
34 Hz - 32 kHz
68 Hz - 52 kHz
62 Hz - 52 kHz
Drive Units
Dual Concentric high frequency
25 mm (1") Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
25 mm (1") Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
25 mm (1") Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
20 mm (0.79") Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
20 mm (0.79") Linear PEI dome
with Torus Ogive WaveGuide
and Omnimagnet technology
Dual Concentric low frequency
150 mm (6") multi-fibre paper
44 mm (1.75") voice coil
150 mm (6") multi-fibre paper
44 mm (1.75") voice coil
200 mm (8") multi-fibre paper
44 mm (1.75") voice coil
100 mm (4") multi-fibre paper
32 mm (1.26") voice coil
100 mm (4") multi-fibre paper
32 mm (1.26") voice coil
Bass driver
—
150 mm (6") multi-fibre paper
pulp cone with rubber surround.
44 mm (1.75") edge wound
voice coil
200 mm (8") multi-fibre paper
pulp cone with rubber surround.
44 mm (1.75") edge wound
voice coil
—
2 x 100 mm (4") multi-fibre
paperpulp cone with rubber
surround.35 mm (1.38") edge
wound voice coil
Crossover
Crossover frequency
1.8 kHz
250 Hz & 1.8 kHz
250 Hz & 1.8 kHz
2.8 kHz
2.8 kHz
Crossover type
Passive low loss 2nd order
low pass, 1st order high pass
Passive low loss 2nd order
low pass, 1st order high pass
Passive low loss 2nd order
low pass, 1st order high pass
Passive low loss 2nd order
low pass, 1st order high pass
Passive low loss 2nd order
low pass, 1st order high pass
Construction
Enclosure type
Downward ported reflex
Downward ported twin
cavity coupled reflex
Downward ported twin
cavity coupled reflex
Rear ported reflex
Rear ported reflex
Volume
10.8 l (0.38 cu. ft.)
30.7 l (1.08 cu. ft.)
48.8 l (1.72 cu. ft.)
3.4 l (0.12 cu. ft.)
7.6 l (0.27 cu. ft.)
Dimensions (H x W x D)
(incl. plinth)
400.5 x 221 x 302 mm
(15.8 x 8.7 x 11.9")
1005 x 269 x 317 mm
(39.6 x 10.6 x 12.5")
1080 x 317 x 345 mm
(42.5 x 12.5 x 13.6")
272.2 x 152 x 199.3 mm
(10.7 x 6.0 x 7.8")
176.9 x 450 x 205.6 mm
(7.0 x 17.7 x 8.2")
Net weight
8 kg (17.6 lbs)
17 kg (37.5 lbs)
21.7 kg (47.8 lbs)
3.5 kg (7.7 lbs)
8 kg (17.6 lbs)
Finish
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Dark Walnut Medium Oak
Technical Specifications
Summary of Contents for REVOLUTION XT 6
Page 10: ......
