Tannoy REVEAL TS12 s, Specifications

Page: 9 / 12

PERFORMANCE 8D
Frequency response
(1)
46Hz-51kHz
Max SPL
(2)
118dB
Distortion <0.4%
Dispersion @-6dB, 10kHz, horizontal 90 degrees
DRIVE UNITS
Drive Units – LF/MID 200mm (8”) multi fibre
paper pulp cone
WideBand
TM
HF 25mm (1”) titanium dome,
neodymium magnet system.
ELECTRONIC SYSTEM
Inputs 600 balanced XLR/Jack,
SPDIF RCA
SPDIF sampling rate 44.1 – 96kHz
Input Sensitivity (0dBu = 0.775mV) -10dBu to +4dBu
for a max SPL of 118dB
Amplifier output power 120W LF / 60W HF
Outputs SPDIF slave out RCA
User Controls Front panel mounted
on/standby/mute switch,
multi-function LED,
Rear panel mounted trim +6/-12dB,
80Hz high pass switch for AV use,
16-way Activ-Assist TM switch array
Reveal 8D
High power active near field reference monitor with Activ-Assist™
Optimised bass-reflex loaded cabinet with 40mm thick front baffle
Shielded 200mm (8”) multi fibre paper pulp cone woofer
Shielded 25mm (1”) titanium dome neodymium tweeter
WideBand
TM
HF extended to 51kHz corrects phase response
Active bi-amplification (120W LF / 60W HF)
Tannoy Activ-Assist™ set-up software enabled
Get the big, deep low-frequency performance of an 200mm (8”) woofer with
the same purity and articulation of the rest of the Reveal range with the
R8D. Combining 180 Watts of bi-amplification, with Activ-Assist™
equalisation technology and an SPDIF digital input, the R8D is ready
for the most demanding applications. Classic Reveal performance
with extended LF response and up to 118dB of power output
makes the R8D the new standard for world-class nearfield
monitoring applications.