5.0 TECHNICAL SPECIFICATIONS
Loudspeaker
Frequency response (1)
60 Hz - 20 kHz
Recommended amplifier power
50 to 100 Watts rms into 8 Watts
Power handling
Average (2)
Programme
50 Watts rms
100 Watts rms
Nominal Impedance
6 Ohms
Sensitivity (3)
90 dB SPL / 1 Watt @ 1 meter
Crossover frequency
3000 Hz
Cabinet
Drive unit
Tannoy 6.5" (165 mm) bass driver
Tannoy 3/4” (19 mm) soft dome tweeter
Low frequency design
Optimized bass-reflex load, in 10 litres
Cabinet construction
MDF high density particle board
Fittings M6 x 2 Omni Mount™
2
0
.0 (formerly 50)
Series Mount
Cabinet finish
Grained Black Vinyl
Cabinet dimensions (HxWxD)
13.75" x 8.2" x 9.13" - 350 mm x 208 mm x 232 mm
Cabinet weight
4.8 lbs - 4.8 kg
Shipping dimensions (HxWxD)
12.5" x 10.3" x 20.8" - 400 mm x 260mm x 527mm
Shipping weight
24 lbs - 16 kg
NOTES :
(1) +/- 3 dB , measured at 1 meter in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS426A.
(3) Averaged over specified bandwidth for half-space environment. For anechoic conditions the figure is to be decreased
by 3 dB.
Tannoy operates a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior
notice. Please verify the latest specifications when dealing with critical applications.
Summary of Contents for ProtoJ
Page 3: ...8 2 208 mm 13 75 349 25 mm...
