background image

11

POWERLINX PLM-4 MIXER/PREAMPLIFIER

Description of Controls

1)

SENSITIVITY TRIM (SENS.)

 Sets the microphone trigger level when 

DIM

 or 

MUTE

 is selected.

2)

DUCKING

 This switch selects one of three options that determine how microphone announcements 

affect the music level:

NONE 

-

 

No ducking

DIM

 - 

Automatic 10 dB music level reduction while speaking into the microphone.

MUTE

 -  Automatically shuts the music off when speaking into the microphone.

3)

MIC

 Adjusts the microphone level (equally distributed between left and right outputs). 

  

Ducking does not affect this level.

4)

STEREO 1 STEREO 3 

 Adjusts the level of the STEREO RCA inputs. These inputs are suitable for CD players,

 

tuners, TVs, VCR audio, etc.

5)

BASS

 Over all adjustment of low frequency levels.

6)

TREBLE

 Over all adjustment of high frequency levels.

7)

MASTER

 Adjusts overall level of all the mixed audio sources. Adjust to provide a suitable signal level to    

the PLC4.1 controller or other following amplifier. Unity gain of the mixer is provided when 

STEREO

 input 

and 

MASTER

 output levels are at 12 o'clock.

POWER

MIC

STEREO 1

STEREO 2

STEREO 3

BASS

TREBLE

MASTER

10

6

8

4

2

0

+12

+3

+6

-3

-6

0

-12

+12

+3

+6

-3

-6

0

-12

MUTE

DIM

NONE

SENS.

6

8

4

2

0

10

10

6

4

2

0

8

10

6

8

4

2

0

10

6

8

4

2

0

MIC

MODEL   

PLM-4 MIXER

-

-

DUCKING

8

1

2

3

5

6

7

4

{

Summary of Contents for PowerLinx Multi-channel Sound Reinforcement...

















Reviews: