background image

2

TANNOY iwSA 500

2 . 0   WA R N I N G S

Before using your amplifier, be sure to carefully read the applicable items of these operating instructions and the safety suggestions.

• Read these instructions.

• Keep these instructions.

• Heed all warnings.

• Follow all instructions.

• Do not use this apparatus near water.

• Clean only with dry cloth.

• Do not block any ventilation openings. Install in accordance with the manufacturers instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce 

  heat.

• Do not defeat the safety purpose of the polarized or grounding - type plug. A polarized plug has two blades with one wider than 

  the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided 

  

  for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit

   from the apparatus.

• Only use attachments/accessories specified by the manufacturer.

• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used 

   use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

• Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way such 

   

  as Power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been 

  exposed to rain or moisture, does not operate normally, or has been dropped.

• To completely disconnect this equipment from the mains, disconnect the power supply cord from the receptacle.

• The mains plug of the power supply cord shall remain readily operable.

• Do not remove top or bottom covers. Removal of the cover will expose hazardous voltages. There are no serviceable parts inside 

  and removal may void the warranty.

2 . 1   I m p o r t a n t   S a f e t y   I n s t r u c t i o n s

2 . 2   WA R N I N G

The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electrical shock to persons.

2 . 3   C A U T I O N

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.

2 . 2   WA R N I N G

To reduce the risk of fire and electric shock, do not
expose this apparatus to rain or moisture and objects
filled with liquids, such as vases, should not be placed
on the apparatus.

Summary of Contents for iwSA 500











Reviews: