24
iW Series
Quick Start Guide
25
iW 62S Model Dimensions
473,5
[18.64]
227,0
[8.94]
187,6
[7.39]
426,1
[16.77]
96,7
[3.81]
Technical Specifications
iW 62S-WH
iW 62DS-WH
iW 6DS-WH
iW 4DC-WH
iW 62 BACKCAN
Performance
Frequency response
(±3 dB) (see note 3)
Passive: 29 Hz - 110 Hz;
Active: determined
by controller
70 Hz - 20 kHz
75 Hz - 20 kHz
88 Hz - 51 kHz
Frequency response
(-10 dB)
34 Hz - 20 kHz
36 Hz - 20 kHz
73 Hz - 54 kHz
Low frequency
alignment (-6 dB)
29 Hz
34 Hz
36 Hz
73 Hz
Power handling
(see note 1)
160 W continuous,
640 W peak
80 W continuous,
320 W peak
70 W continuous,
280 W peak
60 W continuous,
240 W peak
Recommended
amplifier power
100 - 320 W (total)
20 - 160 W @ 8 Ω
20 - 140 W @ 8 Ω
20 - 120 W @ 8 Ω
System sensitivity
(see note 2)
94 dB (2.83 V @ 1 m)
92 dB (2.83 V @ 1 m)
89 dB (2.83 V @ 1 m)
88 dB (2.83 V @ 1 m)
Nominal impedance
4 Ω
8 Ω
Rated maximum SPL
116 dB continuous,
122 dB peak
111 dB continuous,
117 dB peak
107 dB continuous,
113 dB peak
106 dB continuous,
112 dB peak
Crossover
Passive, 2nd order
low-pass
Passive, 2nd order LF, 1st
and 2nd order band-pass
mid, 2nd order HF
Passive, 2nd order LF,
2nd order HF
Passive, 2nd order LF,
2nd order HF
Crossover point
Passive: 110 Hz; Active:
determined by controller
500 Hz, 1.5 kHz
1.7 kHz
1.7 kHz
Crossover HF
adjustment
NA
±1.5 dB
±1.5 dB
NA
Transducers
High frequency
25 mm (1") 25-micron titanium dome,
neodymium magnet system
19 mm (0.75") titanium
dome, neodymium
magnet system
Low frequency
2 x 165 mm (6.5") multifibre paper pulp cone
165 mm (6.5") multifibre
paper pulp cone
100 mm (4.0") multifibre
paper pulp mid bass cone
Wiring
Positive 1, positive 2,
negative 1, negative 2
Positive 1, positive 2
negative 1, negative 2
ground
Positive, negative,
ground
Positive, negative
Physical
Dimensions HWD
473.5 x 227 x 110.5 mm
(18.7 x 8.9 x 4.4")
473.5 x 227 x 92 mm
(18.6 x 8.9 x 3.6")
320 x 209 x 90 mm
(12.6 x 8.2 x 3.5")
238 x 159 x
91mm (9.4 x 6.3 x 3.6")
1200 x 451 x 97 mm
(47.2 x 17.8 x 3.8")
Mounting depth
102 mm (4")
99 mm (3.9")
88 mm (3.4")
Net weight
5.8 kg (12.8 lb)
4.2 kg (9.3 lb)
2.2 kg (4.9 lb)
1.3 kg (2.9 lb)
8.6 kg (19.0 lb)
Construction
Baffle panel: moulded UV Resistant ABS, Clamps: moulded polycarbonate
Cabinet panel: SECC
Finish
White, paintable
Grille
Powder coated perforated steel
Notes:
1. Long-term power handling capacity as defined in IEC standard IEC268-5
2. Averaged over specified bandwidth for half space environment. For anechoic conditions the figure is to be decreased by 3 dB
3. ± 3dB, measured at 1 metre in anechoic chamber in a critically tuned enclosure.
4. Remove links when bi-amping or bi-wiring
5. Remove links in stereo operation
Summary of Contents for iW Series
Page 15: ......
