Tannoy Ellipse 10 iDP, Owner'S Manual

Page: 34 / 56

34
iDP SOFT
™
iDP SOFT
™
is a software editor for the Ellipse monitors. All parameters that can be controlled using the display on the
System Controller can be controlled using the iDP SOFT
™
program.
Installation on PC:
} Place the Installation CD in your CD ROM drive and open CD contents.
} Press Setup
} Follow the instructions.
Installation on Mac:
} Enter the Installation CD in your CD ROM drive and open CD contents.
} Run the installer.
} Follow the instructions.
Minimum requirements
} PC Pentium 2 running Windows 95/98, 2000 or a Mac running OS X
} 64MB RAM
} 800x600 24bit screen resolution
} 1 free Serial port or USB. Connect from Serial or USB port to any free TC LINK connection on your Ellipse iDP ™
monitors using ONLY the cables described on page cables page (Appendix).
A Serial to Cat-5 cable is supplied, if a USB port is used, an optional "USB to Serial Port" converter will
be required. The "KeySpan USA 19" has been tested by Tannoy and found appropriate.
For further information please visit www.keyspan.com or contact Tannoy customer support.
Press to
enter
preset
list