IMPORTANT
A mains cable is supplied - where the moulded plug is fitted with a mains fuse, always replace with the same type and
rating. If the fitted plug is unsuitable for your type of outlet sockets, it should be cut off and disposed of safely. The wires
in the mains cable are coloured in accordance with the following code:
GREEN AND YELLOW
EARTH
BLUE
NEUTRAL
BROWN
LIVE
As the colours of the wires in the mains cable may not correspond with the coloured markings identifying the terminals
in your plug, proceed as follows:
•
The wire that is coloured GREEN and YELLOW must be connected to the terminal in the plug that is marked either
by the letter E, the earth safety symbol, or coloured GREEN or GREEN and YELLOW.
•
The wire which is coloured BLUE must be connected to the terminal in the plug which is marked by the letter N or
coloured BLACK.
•
The wire which is coloured BROWN must be connected to the terminal in the plug which is marked by the letter L
or coloured RED.
•
Ensure that the terminals are tightened securely, and no loose strands of wire are present. Ensure cord grip is
clamped over outer sheath of cable, rather than over the wires.
FUSE PROTECTION
An additional mains fuse is provided
in the IEC power inlet on the amplifier
panel, removable with a screwdriver.
A fuse of the same type and rating
must always replace this.
The correct type is 5mm x 20mm Time
Delay (Type T):
•
T1.6AL / 125V for AC 220-240V/
50Hz operation,
•
T800mAL/ 250V for AC100-120V/
60Hz operation.
S E T U P G U I D E
FOR YOUR OWN PROTECTION
• Store the complete packaging in case it is needed for re-use.
• Never expose the unit to moisture, water and extremes of temperature or humidity. Specifically, the
unit shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases,
shall be placed on the unit. Allow 150mm behind the unit to allow for sufficient ventilation. Articles
such as newspapers, tablecloths, curtains etc must not impede the ventilation. Do not operate with
the rear panel facing a radiator or heater. No naked flame sources, such as lighted candles, should
be placed on the apparatus.
• Never remove the rear panel of the unit, as there is a risk of electric shock.
• There are no user serviceable parts inside the unit. Always refer servicing to your Tannoy dealer or
authorised service agent.
• Avoid violent shocks to the unit during packing or transportation.
• Do not plug the unit into the mains until all other connections have been made and checked.
• Due to the powerful magnet within FX 5.1 subwoofer, do not place within 1m of a television or
computer monitor.
• When set to the 'standby' and 'off' functions, a small amount of current continues to flow to the apparatus
when not in use. If not used for a long period of time, it is recommended that the apparatus is
completely disconnected at the AC mains socket.
• Terminals marked with the flash symbol are hazardous live and the external wiring connected to these
terminals requires installation by an instructed person or the use of a ready-made lead or cord.
• This apparatus is designed for use in moderate climates.
WARRANTY
Please complete and return the enclosed warranty registration document - this does not limit your
legal rights. This equipment has been produced and tested with care and precision. It is built to give
first class service and carries a 1-year warranty. If the equipment proves to be defective within this
period for any reason other than accident, misuse, unauthorised modification or fair wear and tear,
Tannoy will repair any such defect or, at our option, replace it without charge for parts, labour or
return carriage. This warranty is given in addition to the customer's statutory rights.
If you suspect a problem with your loudspeakers, please contact your local Tannoy dealer
who will be able to advise on appropriate action.
