16
1
7
12. DECLARATION OF CONFORMITY:
The following apparatus is/are manufactured in China for Tannoy
Ltd of Rosehall Industrial estate, Coatbridge, Scotland, ML5 4TF
and conform(s) to the protection requirements of the European
Electromagnetic Compatibility Standards and Directives relevant
to Domestic Electrical Equipment. The apparatus is designed
and constructed such that electromagnetic disturbances generated
do not exceed levels allowing radio and telecommunications
equipment and other apparatus to operate as intended, and, the
apparatus has an adequate level of intrinsic immunity to
electromagnetic disturbance to enable operation as specified
and intended. This equipment conforms to the requirements of
the EMC Directive 89/336/EEC, amended by 92/31/EEC and the
requirements of the Low Voltage Directive 73/23/EEC, amended
by 93/68/EEC.
Details of the Apparatus:
Tannoy Contractor Loudspeaker
Model Numbers:
CVS 4
CVS 6
CVS 8
Applicable Standards:
EN55103-1 1996 Emission
EN55103-2 1996 Immunity
Electrical Safety EN 60065: 1993
Signed:
Position: Director of Engineering
Tannoy Professional
Date: 23/11/2011
For Tannoy Ltd
10. PAINTING
If desired, the grille and baffle panel may be painted to match the surrounding décor.
Painting the baffle:
Carefully mask off the driver assembly using the paint-mask provided to ensure that the paint does not come into
contact with the cone and roll surround.
Apply several thin coats of paint – this will provide a better finish than one overly thick coat.
Painting the grille:
Carefully remove the acoustically transparent foam from the reverse side of the grille.
Paint the grille and then replace the foam - several thin coats of paint will provide a better finish than one
overly thick coat.
Re-bond the foam to the grille over the entire area using a light spray-adhesive to avoid audible resonances.
11. WARRANTY
No maintenance of the CVS loudspeaker is necessary.
All Tannoy professional loudspeaker products are covered by a 5 year warranty from the date of manufacture
subject to the absence of misuse, overload or accidental damage. Claims will not be considered if the serial
number has been altered or removed. Work under warranty should only be carried out by a Tannoy Professional
dealer or service agent. This warranty in no way affects your statutory rights. For further information please
contact your dealer or distributor in your country. If you cannot locate your distributor please contact Customer
Services, Tannoy Ltd at the address given below.
Customer Services
Tannoy Ltd.
Rosehall Industrial Estate
Coatbridge
Strathclyde
ML5 4TF
Scotland
Tel:
01236 420199 (National)
+44 1236 420199 (International)
Fax:
01236 428230 (National)
+44 1236 428230 (International)
E-mail: [email protected]
DO NOT SHIP ANY PRODUCT TO TANNOY WITHOUT PREVIOUS AUTHORISATION
Our policy commits us to incorporating improvements to our products through continuous research
and development. Please confirm current specifications for critical applications with your supplier.