
12. Technical Specifications
Frequency response (1) +/- 3dB
60Hz - 300 Hz
Low Frequency Limit (1)
-10dB @ 45Hz
Recommended Amplifier Power
400 - 900 watt / 8 ohm
Power Handling
Average(2) Programme Peak (10ms)
400 watt 800 watt 1600 watt
Sensitivity (1)
2.83 volt @ 1m
101 dB
Maximum SPL (3)
RMS
Peak
@ 1m
126 dB
132 dB
Impedance
Nominal
8 ohm
Minimum 7.1 ohm
Distortion
0.1 Full Power
2nd Harmonic
3rd Harmonic
100 Hz
0.89%
0.13%
250 Hz
0.14%
0.10%
0.01 Full Power
100 Hz
0.25%
0.04%
250 Hz
0.10%
0.09%
Driver Compliment
2 x 15” High efficiency Bass Units. Type Number 3801
Crossover Point
Active: Recommended points
100 - 300 Hz, 24dB/octave, Linkwitz - Riley
(dependant on application)
Enclosure
18mm multi-ply birch plywood
Finish
Textured black\grey paint
Protective Grille
Perforated steel, black with 50% free air flow
Connectors
2 x Speakon NL4MPR IN/OUT
Rigging/Fittings
2 x Recessed carrying handles
1 x 35mm Pole Mounting Socket
2 x MAN Blanking Plates
2 x Rear Kelping Brackets
Dimensions
576mm(H) x 555mm(W) x 650mm(D)
22.7ins(H) x 21.85ins(W) x 25.6ins(D)
Weight
40 Kg (88 lbs)
NOTES:
(1) Average over stated bandwidth. Measured at 1m on axis using , in an anechoic chamber.
(2) Long term power handling capacity as defined in EIA standard RS - 426A.
(3) Unweighted pink noise input, measured at 1m
Tannoy operate a policy of continuous research and development. The introduction of new materials or manufacturing
methods will always equal or exceed the published specifications which Tannoy reserve the right to alter without prior notice.
Please verify the latest specifications when dealing with critical applications.