Tannoy AMS Series, Operation Manual

Page: 8 / 28

5. Installation
8
AMS Series Operation Manual rev 1.1.0
Connect the euro-style plug to the wires, observing correct polarity. Use pins 1(+) and 2 (-) for connection of the
loudspeaker. Use pins 3 (-) and 4 (+) for connection of additional loudspeakers in a distributed line.
NOTE: Tighten pins 3 and 4 even if not used to prevent vibration of the screws.
6. Raise the lever to open the wall bracket. Insert the ball bracket into the wall bracket, position as required,
and then lower the lever to lock the ball bracket into place. Raise the lever if any readjustment is necessary.
Once in final position, tighten the grub screw at the bottom of the wall bracket to secure in place.
7. Connect the euro plug to the loudspeaker. For outdoor installation, attach the cable entry cover using a
3 mm Allen key and included screws. Orient the cover plate so that the neck opening is facing downward to
minimise entry of moisture or particulates.
8. Connect a secondary support line to the safety tab at the rear of the cabinet.