TROUBLESHOOTING
www.tanningessentials.co
TANNING CURTAIN CARE INSTRUCTIONS
IRON ANY
TEMERATURE
DO NOT
DRY CLEAN
NO TUMBLE
DRY
MACHINE
WASH COLD
DRIP
DRY
Remove fiberglass pole before cleaning in the
washing machine. Do not use fabric softener.
If you are experiencing problems with your curtain please refer to the table below to assist
with troubleshooting. If this table does not provide a resolution to the fault you are
encountering please contact your supplier for assistance.
PROBLEM
CAUSE
WHAT TO DO
The hooks are
not affixing to
the wall properly
or at all.
There is excess
liquid on and
around the
curtain.
The curtain has
become creased
and will not drop
down easily.
Ensure the area is clean and dry
before affixing the adhesive hooks
Machine wash cold – do not use
fabric softener.
Drip Dry
Wash with normal washing
detergent and do not use fabric
softener as this strips the water
proofing feature.
Iron on any temperature.
The area is not dry or the
surface has not been cleaned.
The curtain needs to be
cleaned and solution is
dripping from hard to reach
areas.
The curtain has not dried
properly and liquid is trapped
inside hard to reach areas
The curtain has been over
washed or fabric softener has
been used and the water
proofing feature no longer
works.
The curtain has been stored
for too long and over folded.
The curtain has become
creased after being washed
