1
0
GB
Be
fo
re
u
se
(P
ro
du
ct
As
se
m
bly
a
nd
C
om
po
ne
nts
)
Caution
Installation of the Equipment (Remote Display Version)
Level Adjustment
When using the stand
When installing the display box on the wall
2.Preparation for Use
Level Gauge
(Remote Display Version)
Place the equipment on a level surface. If the equipment is
not stable, for example because not all the feet are on a
level surface, there is a risk that it will topple over and it will
be impossible to obtain an accurate measurement.
For a column mounted version, adjust the level gauge, then
adjust the position of the supplementary feet (small) so that
they lightly touch the floor to prevent the display box from
shaking.
For accurate measurement, place the equipment on as
flat a surface as possible and adjust the level with the
adjustable feet so the bubble in the level gauge is in the
centre of the frame.
Pull out the stand at the back of the display box.
When putting away the display box, insert the stand in the slot on the back of the
display box.
・
There is a danger that the Display Box may fall down if it is not fixed
securely.
・
Avoid installing the Display Box in a place where users may step on or
get caught by the cable.
・
Do not swing the Display Box by the cable.
Screw the wall-hanging screws into the wall (leave the screws protruding 5 mm
from
the wall).
Insert the screws into the holes on the back of the display box.
Pull down the display box securely into place.
Level Gauge
(Column Mounted Version)
Adjust the level by rotating the adjustable feet.
Adjust the level by rotating the adjustable feet.
1
2
3
1
.
2
.
3
.
