9
Before
use
(Preparation)
GB
8
Before
use
(Product
A
ssembly
and
Components)
GB
Setting of the printer paper
1
Press
to turn on the power.
• After all lamps light up, the model number is displayed as
,
and is
displayed.
2
(1) Press .
(2) Remove the printer cover.
OPEN
Press the
, and cut off the
excessive paper.
FEED
Setting completed.
3
(3) Set up the printer paper
• Remove the adhesive of the printer paper and draw it
out approx. 10 cm / 3 inch.
4
Return the printer cover.
• In the case that
is displayed,
e
The printer cover is open, so please close it
again properly (
page 43).
• In the case that the automatic cutting is set to
“OFF,” the automatic cutting does not function
(
page 14).
5
6
Preparation
Setting of the printer paper
Connection of Plugs
Control panel
Rear side of the
controller
AC adapter
•To avoid electric shock, do not insert or remove the plug with wet
hands.
•To avoid electric shock, do not use the equipment near water.
•To avoid measurement error, do not measure while using equipment that generates
radio waves, such as mobile phones.
•Use only the original AC adapter (MODEL: SA165-0950U-3). Using AC adapters
other than the original one may cause malfunction, smoke or fire.
Symbols and their Meanings
Power On
Power Off
Direct current
Input, Output
Class II
Equipment
Advances the
paper
Caution
Refer to the
attached notes.
Male
Female
Clothes Weight
Setting
•Please change the paper roll when red lines appear along the sides of the paper.
•Please pay careful attention to avoid injury from the sharp edge.
•Please turn off the machine before clearing Paper jams.
