GB
4
1. Select Personal Data Number
Press the Down button to turn on. Use the Up/Down buttons to select
your Personal data number. Press the Set button to confirm.
(Release the key within 3 seconds or the display will show “Error”.)
The unit will beep and the display will show the programmed data.
The unit will beep again and the display will show “0.0”. Now
step onto the platform.
Note:
•If you step onto the platform before “0.0” appears the display will show
“Error” and you will not obtain a reading. Furthermore, if you do not step
onto the measuring platform within about 30 seconds after “0.0” appears,
the power is shut-off automatically.
•When using the “Down” button to turn the unit on, the personal data
number last used will appear first.
•Numbers that are not pre-programmed are automatically skipped.
TAKING WEIGHT AND BODY FAT READINGS
2.Obtain Your Readings
Your weight will be shown first.
Continue to stand on the platform.
“0000” will appear on the display and disappear one by one from left to right.
Your Body Fat percentage (%FAT) and Body Fat Range will appear on the
display screen. After your body fat percentage has been calculated, a white bar
will flash the healthy range indicator along the bottom of the display identifying
where you fall within the Body Fat Ranges for your age and gender.
Note:Do not step off until Body Fat % is shown.
Note:For children(age 5-17),the unit will only display the weight / Body Fat %
and Healthy Range Indicator.
To see other readings
, carefully step off scale,
press the up button
continually to display readings in the order listed below.
(Press the down button for reverse.)
The Up/Down buttons will not function while remaining on scale.
