background image

GB

GB

5

4

Safety Notes

Do not lean the product against the wall where people and objects pass by.

Someone may touch the product and it may fall down 

Caution Symbols

Thank you for purchasing this precision crafted Tanita product. For optimum per-
formance and safety, please familiarize yourself with the Caution Symbols below.
These symbols are designed to alert the user to potential hazards when using this
equipment. Ignoring these Caution Symbols may result in serious injury, or damage
to the product.
Please be sure to review before proceeding with the INSTRUCTION MANUAL.

• Inserting and Removing the AC adapter

To reduce the risk of electric shock or product damage, never insert or
remove the AC adapter with wet hands.

• Do not under any circumstances dismantle or alter the device, as this

could result in electric shock or injury as well as adversely affect the preci-
sion of measurements.

• To prevent fire hazard

Use only a correctly wired (120V AC) outlet, and do not use a multiple
outlet extension cable.

• Do not sit on the edge of the scale, jump on it, or bounce on the baby bas-

ket, as any resultant fall or slip may cause serious injury.

• The baby basket is not designed to accommodate individuals weighing

more than 33lb(15kg).

• As a safety precaution, infants must not be left unattended on the baby

basket.

This symbol indicates the possibility of serious
injury if the product is mishandled or instruc-
tions are ignored.

This symbol indicates the possibility of physi-
cal injury or equipment damage if instructions
are ignored.

This symbol indicates general precautions that
should be taken when using this product.

Warning

Caution

Warning

• Please make sure you place the scale on a level and stable surface. If the equipment is

used when the scale is unstable because not all feet are on the surface, there may be a
risk of stumbling or inaccurate measurement.
Never jump on the scale, there may be a risk of stumbling and malfunction of the equip-
ment.

• For the BD-815U; Ensure you use the original AC Adapter (MODEL: AD-0920M). Using

an AC Adapter other than the original one may cause malfunction.
Do not insert or remove the plug by the cable.

• Do not place a finger into the gap or hole of this equipment.

You may get injured.

Caution

This is a precision manufactured and accurately calibrated product. Please
observe the following instructions.

• Never disassemble or adjust the equipment, as this may cause malfunctions. The equip-

ment should only be inspected in accordance with the regulations in each country.

• When not in use for a long time, unplug the AC Adapter from the wall socket.
• Do not wipe the equipment with corrosive chemicals (benzine, cleaner, etc.). Please use

a neutral detergent to clean the equipment.

• Avoid subjecting the equipment to excessive shocks or vibrations.
• When disposing of this unit, please do so in accordance with the prevailing regulations

in each country.

• If an unauthorised person attempts to disassemble or repair any of the part, the warran-

ty will become invalid. When the unit malfunctions, please consult your nearest Tanita
sales office or agent.

• Do not wash any part of the scale other than the basket with water.

Maintenance

Summary of Contents for BD-815U
















Reviews: