Tanita 3500 Operator'S Manual Download Page 8

WARRANTY

Tanita Corporation (“Tanita”) warrants that for a period of three years from the date of
purchase, this product will be free from defects in material and workmanship. This
warranty covers all components of this scale, with the exception of the AC adapter.
The AC adapter is warrantied for one year. Tanita, at its option, will repair or replace this
product or any component of the product found to be defective during the warranty
period. Replacement will be made with a new or remanufactured product or component.
If the product is no longer available, replacement may be made with a similar product of
equal or greater value. This is your exclusive warranty.

This warranty is valid for the original purchaser from the date of initial purchase and is
not transferable. Tanita dealers, service centers, or retail store outlets selling Tanita
products do not have the right to alter, modify or in any way change the terms and
conditions of this warranty.

The warranty does not cover normal wear of parts or damage resulting from negligent
misuse of the product. Further, the warranty does not cover Acts of God, such as fire,
flood, hurricanes, and tornadoes.

Tanita shall not be liable for any incidental or consequential damages caused by the
breach of an express or implied warranty or condition. Except to the extent prohibited by
applicable law, any implied warranty of merchantability or fitness for a particular purpose
is limited in duration to the duration of the above warranty. Tanita disclaims all other
warranties or conditions, express or implied statutory or otherwise. Some provinces or
jurisdictions do not allow the exclusion or limitation of incidental or consequential
damages or limitation on how long an implied warranty lasts, so the above limitation or
exclusion may not apply to you. This warranty gives you specific legal rights, and you 
may also have other rights that vary from state to state or province to province.

How to Obtain Warranty Service

Call (877) 682-6482 to obtain a Return Authorization for warranty service. Then, send 
the product with proof of purchase included. Ship with freight and insurance prepaid to:

Tanita Corporation of America Inc.

Attn: R/A #______

102 Progress Drive

Saukville, WI 53080

Make certain that your scale is properly packed to avoid damage in transit to the 
factory. If your scale is not covered by warranty, or has been damaged, an estimate 
of repair costs or replacement costs will be provided to you for approval prior to 
servicing or replacing.

7

Tanita Corporation of America, Inc.

2625 South Clearbrook Drive

Arlington Heights, IL 60005

Toll Free: (877) 682-6482

Direct: (847) 640-9241

Fax: (847) 640-7978

© 2003 Tanita

Summary of Contents for 3500









Reviews: