Allspeeds Document - Tangye Hydralite Manual
Page 23 of 27
Rev 1. Issue 1. Date: 01/07/2021
6
After Use
After use, store the jack in an upright position with the ram
fully descended
and the operating quadrant in the ‘up’
position.
Figure 15 - Storing With the Quadrant "Up"
Always
close the release valve, to ready the jack for the next
operation (see Figure 6).
Always
clean the ram and retract after use.
Always
remove the jack operating handle when not in use as
this can cause a trip hazard if left in the jack.
Always
ensure any oil spills are cleaned up after use.
