TANGRA HP 30, Installation And Operation Manual

Page: 6 / 32

User manual TANGRA HP30 - Rev. 04 - 2014-03-28 6
Before start any installation, commissioning or service
works, please read very carefully this manual!
1. Introduction
The pellet boilers, manufactured by TANGRA, are produced in accordance with all applicable
Bulgarian and EU requirements.
Their installation and usage should be done according to the following instruction.
The manufacturer is not responsible for damages due to improper use.
This manual is an integral part of the unit. It should be kept in an easy accessible place for the
operating personnel. We recommend keeping it near the air handling unit.
By installation, dismantling, maintaining or cleaning the unit all safety rules should be strictly
observed. The use of personal protective equipment is required!
Changes in the construction of the unit and all its components without consulting the
manufacturer are unacceptable and could lead to improper work of the unit, damages or
incidents.
By decommissioning it is important to follow strictly the prescription for environmental protection,
as well as to dispose of the units in accordance with local regulation and practices for waste
management.
Safety symbols
The following symbols could be found on the products or in the current instruction:
DANGER!
Warning! Electricity! Components under voltage!
Warning!
General warning sign.
Attention!
Attention!
Mandatory use of protective gloves and personal protective equipment!
Attention!
Please, read this part of the instruction carefully!