6
B. The LED will start to flash green when the batteries are running low on power, and
no power supply is connected.
C. The LED will be red when the installed batteries are being charged.
Note: Only install rechargeable batteries when the power supply is not connected.
7. FREQUENCY
SCALE
: Shows both the AM and the FM frequency of the tuned
channel.
8. TUNING INDICATOR
: The tuning indicator will appear brightest when best tuning has
been achieved. Some weak, but listenable AM stations will not light the tuning indicator
and should be tuned for loudest and clearest signal.
Rear panel
1. 12-15VDC
: Use this input to connect the radio DC power supply.
2. HEADPHONE
: Connect a separate headset to this connector to listen to the radio with
a headset. Inserting headset will turn off main speaker.
3. REC OUT
: The radio can be used as a separate tuner by connecting it from the record
out to an amplifier.
