Tangent MCS-600, Instruction Manual

Page: 11 / 20

REMOTE CONTROL
Installation of batteries
1 Remove the battery cover as illustrated.
2 Position two batteries of the type AAA/R03/UM4 in the
battery compartment. Make sure that the orientation of the
batteries is correct (see drawing at bottom).
3 Replace the battery cover.
- Do not mix new and old batteries and do not use different types of batteries.
- If the remote control is not used for prolonged periods, remove the batteries from the remote control to avoid corrosion.
Using the remote control
Direct the remote control at the sensor on the front panel of the unit. When the remote control signal is received, the unit reacts
accordingly. The remote control works within a range of 6 metres.
- Sometimes the remote control does not work well in strong
light. You may have to move the unit if it is a problem.
- Malfunction may occur if other remote controls are used near
the unit.
- Do not place any objects on the remote control, as the batteries
may become flat if a key is depressed constantly.
- Make sure that there are no obstacles between remote control
and unit.
- Do not position the unit behind tinted glass as it may reduce the
maximum range of the remote control.
11
MCS-600 Mini CD System
VOLUME
LINE IN AUX 2
PHONES
TUNING
STANDBY
POWER
REPEAT SOURCE STATION
POWER
MCS-600
VOLUME
0
1 2 3 4
5 6 7 8
9 10+
TUNING TUNING
STATION
STATION
CD TUNER
AUX1 AUX2
DVD
TAPE LINE IN
ST/MO
PTY
SEARCH
APS MEM AUTO
BASS TREBLE BALANCE
REPEAT DISPLAY LOUDNESS
MUTE