OPERATION AND FUNCTIONS
Program
Repeat
The CDP-100 can be programmed to play the tracks of a CD
in a certain order.
Press the PROGRAM button when playback has been
stopped.
The display will show the message “Program--00--000”
The number to the left is the total numbers of tracks
programmed.
The number to the right is the track number programmed to
the number in the programmed order.
Finish the programming by pressing PLAY.
For examble if you wish to program the track numbers 5, 8, 4
in this specific order the following must be done:
- Press the PROGRAM button.
- Press the number 5 button.
Press the STOP button once to deactivate the programming
function. Then the normal display will return.
- Press the number 8 button.
- Press the number 4 button.
- Confirm the programming by pressing PLAY.
When you press I<< or >>I, you will select the next track in the
programmed order.
Note:
The CDP-100 can be set to repeat one or all tracks of a CD.
This is done by means of the REPEAT button on the remote
control. (Note that this function can only be activated by
means of the remote control).
If you press the button once, one track will be repeated and
the second number from the left will start to flash.
If you press the button twice, all tracks will be repeated
If you wish to deactivate the repeat function, press the
REPEAT button for a third time.
Note:
This function can also be used when "Program" has been
activated.
and
the first number from the left will start to flash.
17
CD 20-008-04:26
Flashing when repeat
ONE is activated
CD 20-008-04:26
Flashing when repeat
ALL is activated
Program--00--000
Program--01--005
Program--02--008
Program--03--004
