STEP BY STEP INSTRUCTIONS
PART NUMBER
Z-3152
CA-0619
C-4242
K-0669
HB-4804
- - -
E-0007
PARTS LIST
DESCRIPTION
Base Plastic
Cioil, Antenna
Tuning Capacitor
Knob for Tuning Capacitor
Spring Terminals
Diode
Earphone
DESCRIPTION
Red wire, short (50mm)
Red wire, long (70mm)
Black wire, short (60mm)
Black wire, long (110mm)
White wire short (70mm)
White wire, long (90mm)
PART NUMBER
- - -
- - -
- - -
- - -
- - -
- - -
DESCRIPTION
Green insulated wire
(for Antenna and Ground)
Screw, small & long (2.6 x 4mm)
Screw, small & short (2.6 x 3mm) (2)
Screw, medium (3 x 6mm)
Nut (3mm)
Antenna Coil Holder
PART NUMBER
W-1587
HD-2042
HD-2041
HD-2055
HD-7003
H-1535
Check each step as you complete it.
Check Parts List to become familiar with
each component.
Install the 11 Spring Terminals on the
Plastic Base - one at each large hole.
Do thei by pressing down firmly with the
point of a pencil and twist in place.
To connect wires to the Spring Terminals
bend the Spring over and insert the bare
wire end into the spring and release.
Mount Tuning Capacitor from the bottom of the Base and
secure with the two small, short screws. Mount Tuning Knob
with the small, long screw.
Connect leads from Tuning Capacitor to
terminals 12 and 13.
Do not cross leads.
2
