13
Preparation
n Preparation
SETTING THE DIALING MODE
Set the dialing mode for the type of service you have. If you are not
sure which type you have, once the battery pack is fully charged,
do this test.
1
Lift the handset, then
press
PHONE
and listen for
the dial tone.
2
Press any number other than
0
.
Note: If your phone system requires that you dial an access
code (9, for example) before you dial an outside number, do not
press the access code either.
If the dial tone stops, you have touch-tone service. Since the
phone is preset to touch-tone service, you do not need to change
the dialing mode.
If the dial tone continues, you have pulse service. Press
PHONE
PROG/MEM
#
#
#
3
.
If your phone is set for pulse service and you want to change
the dialing mode to touch-tone service, press
PHONE
PROG/MEM
#
#
#
8
.
SETTING THE DAY AND TIME
You can use the handset as well as the keys on the base to oper-
ate the TAD. To use the handset, simply press
ANS SYS
to access
the TAD before beginning each procedure. The ANS SYS indicator
lights and the TAD announces the number of messages then
beeps twice.
43-5805.fm Page 13 Wednesday, August 18, 1999 1:22 PM
